Simrad EQ42 Manual page 9

EQ42/50/52 Fundamentals & initial start-up
POSITION
_1_ Position
WIN
Press the
-which is the left top quarter of the screen.
1
Select the Position display
- you will now have the position display presented in window 1.
The rest of the windows in this page i.e. window 2, 3 and 4 will contain
the displays which were pre-set from the factory. They can all be
exchanged with new displays at your choice.
However, the same display can not appear twice on the same page,
so in case you are trying to select the same display in a second
window, this is what will happen:
As per above example, you have selected the Position display in
window 1, but it may just happen that the Position display was pre-set
to window 2 – therefore window 2 will now show the legend: " Select
display via MENU."
You may select the same display to appear on different pages, but not
on the same page.
WIN
_1_
POS
[WIN]
key once to select window 1
What you do now will determine
which WINdow the display you are
about to select will appear in.
[WIN]
Press the
scroll through the window system.
9
Chapter 2
key repeatedly to