Simrad EQ42 Manual page 8

EQ42/50/52 Fundamentals & initial start-up
To mix and match the various echo and data displays you wish to have
in the PAGE and WINdows pesentation, you will first need to know
what is pre-set from the factory:
PAGE
Scroll through the four pre-set pages to see if you wish to exchange
any of the displays with a different one.
Example of how to edit a pre-set page:
window
5
You now wish to insert the "Echosounder setup" display in window 3
instead of the echo display in 50kHz. This is the procedure:
WIN
Press the
MENU
Call up the menu bar, and...
3,8
then call up the ECHO menu and select "Echosounder setup"
- you will now have the "Echosounder setup" display in window 3
instead of the echo display in 50kHz.
Example of how to edit a full screen to four ¼ displays:
We pretend that you are looking at a full screen which you wish to
divide into four ¼ displays. This is the procedure:
MENU
First call up the menu bar, and...
1
then call up the POS menu - see example next page.
As many as 4 screen combinations or full
screens can be saved in four pages.
Press the
four pages, or hold the [
to start a rotation of the four pages.
Press [
operation.
window We pretend that in this page, window 2 contains the
2 navigation display (highway), window 3 an echo
display in 50kHz, and window 5 an echo display in
window
200kHz.
3
[WIN]
key until the frame around window 3 is highlighted
[PAGE]
key to toggle between the
PAGE]
again to return to manual
8
Chapter 2
PAGE]
key depressed