Honeywell Lynx Plus Programming Manual page 6

Data Field Display
49 49 49 49
SPLIT/DUAL REP SPLIT/DUAL REP
SPLIT/DUAL SPLIT/DUAL REP REP
50 50 50 50
15 SEC DIAL 15 SEC DIAL D D D D LY LY LY LY
15 SEC 15 SEC DIAL DIAL
51 51 51 51
PERIOD PERIOD PERIOD TEST PERIOD TEST REP TEST TEST REP REP REP
52 52 52 52
TEST REP TEST TEST TEST REP REP OFFSET REP OFFSET OFFSET OFFSET
53 53 53 53
SESCOA/RADIONICS SESCOA/RADIONICS SESCOA/RADIONICS SESCOA/RADIONICS
54 54 54 54
LACK LACK OF OF OF OF USAGE USAGE
LACK LACK USAGE USAGE
55 55 55 55
REPORT REPORT REPORT REPORT CHANNELS CHANNELS CHANNELS CHANNELS
58 58 58 58
RF RF RF RF JAM JAM DETECTION DETECTION
JAM JAM DETECTION DETECTION
† Entering a number other than the one specified may give unpredictable results.
Function& Programming Options
Split/Dual Reporting
[0]
To Primary Phone No.
0 = All reports
1 = Alarms, Restore, Cancel
2 = All except Open/Close, Test
3 = Alarms, Restore, Cancel
4 = All except Open/Close, Test
5 = All
To Primary Phone No.
6 = All reports except Open/Close
7 = All reports
8 = All reports
9 = All reports except Open/Close
To Primary Phone No.
10 = All except Open/Close
11 = All reports
12 = All reports
13 = All except Open/Close
‡ Will report users 0, 5-8 or wireless arm/disarm button zones 26-33; all other zones and users do not
report.
15 Second Dialer Delay (Burglary)
† [0]
0 = no; 1 = yes;
Periodic Test Report
(enter Test Code in field ✻64)
† [0]
0 = none; 1 = 24 hours; 2 = weekly; 3 = 30 days
First Test Report Offset
† [2]
0 = 24 hour; 1 = 6 hours; 2 = 12 hours; 3 = 18 hours
SESCOA/Radionics Select
[0]
0 = Radionics (0–9, B–F reporting);
1 = SESCOA (0–9 only reporting). Select 0 for all other formats.
Lack of Usage Notification
[0]
0 = Disabled 2 = 7 days 3 = 27
1 = 1 day days
Reporting Channels
[0]
0 = Telco Line (no Radio)
1 = LRR/IP(Digital Communication only) and Telco Line
3 = LRR/IP (Digital Communication only) (no Telco Line)
5 = LRR/IP (Digital Communication with AAV) (Telco Line connections for 2-way voice
session only, if applicable)
RF Jam Detection
[0]
0 = no RF Jam Detection; 1 = RF Jam Detect on, no CS report;
2 = RF Jam Detect on with CS report (if trouble/restore report is enabled in fields
[ ] = Programmed Table 1 Default Values
To Secondary Phone No.
None, unless primary fails, then all
Others
Open/Close, Test
All
All
All
To Paging Number
Alarms, Open/Close‡, Troubles
Alarms, Troubles
Alarms, Open/Close‡, Troubles
Alarms, Troubles
To Follow Me System Phone Number)
Alarms, Open/Close‡, Troubles
Alarms, Troubles
Alarms, Open/Close‡, Troubles
Open/Close‡
4 = 90 days
5 = 180 days
Note: For event logging option 2 must be selected.
- 6 -
UL installations = 0
6 = 365 days
✻ ✻
60, 71)