Toshiba RAS-18N3KV-E Service Manual page 88

No. Part name
Front panel 4) Press "PUSH" part under the front panel

5) Remove the front panel fixing screws.
6) Take off four hooks of panel from rear
<How to assemble the front panel>
1) Press three center positions and two lower center positions of the air outlet, and
2) Tighten four screws.
Procedures
and remove hooks of the front panel from
the installation plate.
(4 pcs.)
side.
then hang the hanging hooks (4 pcs.) at the top side of the front panel to the rear
plate.
• Incomplete hanging or incomplete pressing may cause a dewdrops or generation
of a fluttering sound.
– –
87
FILE NO. SVM-12071
Remarks
Installation plate
Front panel
Press
4 Screw
2 Screws
Three hooks
Four hooks