Chevrolet Equinox2011 Owner's Manual page 204

7-48 Infotainment System
Declining a Call
Press the MENU/SELECT knob to
Decline and press the MENU/
SELECT knob to decline the call.
Switching Between Calls (Call
Waiting Calls Only)
To switch between calls:
1. Press the MENU/SELECT knob.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Press the MENU/SELECT knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See Entering a
Character Sequence in
Operation on page 7 7 for more
information.
4. After the call has been placed,
press the MENU/SELECT knob
and choose Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added are limited by
your wireless service carrier.
Ending a Call
Press the MENU/SELECT knob and
select Hang Up.
Muting a Call
To Mute a Call
Press the MENU/SELECT knob and
select Mute Call.
To Cancel Mute
Press the MENU/SELECT knob and
select Mute Call.
I n f o r ma t i o n P r o v i d e d b y :
Dual Tone Multi-Frequency
(DTMF) Tones
The in vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Press the MENU/SELECT knob
and select Enter Number.
2. Enter the character sequence.
See Entering a Character
Sequence in Operation on
page 7 7 for more information.
Bluetooth (Voice
Recognition)
Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See the cell phone
manufacturer's user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made