Disassembly And Reassembly - Samsung SMH1713 Series Service Manual

3. Disassembly and Reassembly 3. Disassembly and Reassembly
MAGNETRON, MOTOR ASSEMBLY, VENT BLOWER AND HIGH VOLTAGE TRANSFORMER
Oven must be removed from wall.
REMOVING OVEN FROM WALL (2 PEOPLE REQUIRED)
House Duct
8
Disconnect the power cord from the outlet .
The oven is hooked on the metal tabs of the wall
mounting plate that is secured to the wall . It is not
necessary to remove this mounting plate to service this
unit .
This unit is attached to the cabinet above by two self
aligning screws . Support the unit while removing these
screws allowing it to hinge downward to disengage the
unit from the mounting plate .
Be aware there may also be a connection to the range
vent ductwork that is attached to the top or back of the
unit through an exhaust adapter/damper .
Remove the oven from the wall