Tuner Set - JVC DR-MH20S Instructions Manual

Tuner Set

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
ENTER
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be displayed on
the right side of "BAND" on the Tuner Set screen.
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press ENTER.
3
Press w e to select "TUNER
SET UP", then press ENTER.
4
Press rt to select "AUTO CH
SET", then press ENTER. You can
automatically set the receivable
channels in your area in the order
of their frequencies.
When Auto Channel Set is
complete, "SCAN COMPLETED"
appears on the TV screen.
If the scan was unsuccessful,
"SCAN COMPLETED–NO SIGNAL–" appears on screen. Check the
connections and start again.
5
Press SET UP to complete the setting.
CABLE/DBS
TV DVD
rtwe
SET UP
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
TUNER SET UP STB SET UP CLOCK SET UP
AUTO CH SET MANUAL CH SET
GUIDE CH SET
11
12
13
SET UP ENTER
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
INITIAL SET UP > AUTO CH SET
AUTO CHANNEL SET SCANNING
ENTER
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
Manual Channel Set
You can add the channels you want or delete the channels you do
not want manually.
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press ENTER.
3
Press w e to select "TUNER SET UP", then press ENTER.
4
Press rt to select "MANUAL CH SET", then press ENTER.
5
Add or skip the desired channels.
To add channels
A Press rt to select "CH", then
press ENTER.
B Press rt to select a channel
number you want to add, then
press ENTER.
C Press rt to select "ADD/SKIP",
then press ENTER.
D Press rt to select "ADD", then press ENTER.
E Repeat B – D to add other channels.
To skip channels
A Press rt to select "CH", then press ENTER.
B Press rt to select a channel number you want to skip, then
press ENTER.
C Press rt to select "ADD/SKIP", then press ENTER.
D Press rt to select "SKIP", then press ENTER.
E Repeat B – D to skip other channels.
6
Press SET UP to complete the setting.
INITIAL SETTINGS
23
EN
INITIAL SET UP > MANUAL CH SET
BAND CATV
CH 1
ADD/SKIP ADD
RETURN
SET UP ENTER
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT