Copying From Dvd To Vcr; On-Screen Display - Vcr - JVC HR-XVC40B Instructions Manual

Copying from DVD to VCR

You can copy the contents of a DVD to a VHS tape.
1. Insert the disc you wish to copy into the DVD
deck and close the disc tray.
2. Insert a blank VHS video tape into the VCR deck.
3. Find the place on the DVD from which you want
to start dubbing using the PLAY, FF, REW and
PAUSE functions.
For best results, pause playback at the point from
which you want to record.
4. Press the z (REC). The DVD goes into PLAY
mode and the VCR goes into RECORD mode. If
the DVD disc menu appears, you may need to
press N (PLAY) manually to begin copying.
5. When the DVD is finished playing, press x
(STOP) to end copying.
Notes:
• If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs (or Discs). "Lock" is
displayed in the display window.
• You must stop the copy process manually when the
DVD movie ends, or the unit may replay and record over
and over again.
• When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.

On-Screen Display - VCR

On-Screen Display - VCR
Some of these functions will be displayed every time
the DVD+VCR is operated.
❶ ❷
PLAY HI-FI
SP
JAN 1 , MON
❻
❶ TAPE SPEED DISPLAY
❷ FUNCTION DISPLAY
❸ HI-FI DISPLAY
❹ CHANNEL DISPLAY
❸ ❹ ❺
CH 4
STEREO
2:15 PM
❼
❺ STEREO/SAP DISPLAY
(MONO is not displayed)
❻ DATE DISPLAY
❼ CLOCK/ COUNT/
REMAIN DISPLAY
Each press of the ENTER (OK) changes the TV
screen in the following sequence.
STOP CH 4
SP STEREO
JAN 1, MON 2:15 PM
2:15 PM
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
DISPLAY to select the real-time counter display.
Every press of DISPLAY changes the TV screen as
illustrated below.
2:15 AM
CLOCK
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is dis-
played on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to "0:00:00" by pressing
CLEAR (0000)
.
4. Continue to play or record.
x (STOP)
5. Press
finishes.
m (REW)
6. Press
when the tape counter returns to about "0:00:00".
Tape Remaining
This function displays the amount of time remaining
on the tape during recording or playback. Press
DISPLAY repeatedly until the REM indicator displays
on the TV screen during recording or playback.
The remaining tape length may not be displayed cor-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
Notes:
• The function displays can be seen displayed on the TV
screen for 5 seconds.
• The clock (or tape counter, tape remaining) mode will be
displayed until you press
• The tape counter and the remaining tape length indica-
tor appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
0:35:40
REM 1:58
0:05:25 REM 1:07
COUNTER REMAINING TIME
when recording or playback
. The tape automatically stops
ENTER (OK)
.
25