Initial Settings - Vcr; General Operation; Clock; Setup - JVC HR-XVC14BU Instruction Manual

Initial Settings - VCR

By using the VCR Setup menu, you can make
various adjustments to items such as clock setting,
and timer recordings.
Your unit allows remote control adjustment of several
features.

General Operation

1. Press VCR on the Remote Control.
2. Press SETUP MENU and the MAIN menu will
appear.
3. Use v/V to select the desired menu, then press
ENTER (OK).
4. Use v/V to choose a desired option on the select-
ed Menu. Then use b/B to choose a desired
setting.
5. Press SETUP MENU when finished.
Note:
Menus remain on-screen for 3 minutes.

CLOCK

Use v/V/b/B to enter the necessary information.
• MONTH : Choose the month.
• DAY : Choose the date.
The day of the week will display automatically.
• YEAR : Choose the year.
• TIME : Choose the time.
Press and hold b/B to advance clock continuously.
Note:
The clock uses the 12-hour system. Be sure to set
AM and PM correctly.

SETUP

FUNCTION OSD
The on-screen display can be turned on or off.
AUDIO MODE
The unit has two separate audio playback systems,
the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system
plays on separate (left and right) channels, and the
NORMAL system plays monaural sound. The normal
track is always played so the cassette can be played
on a unit that does not have VHS Hi-Fi.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
(HI-FI/NORMAL) is in HI-FI position] for selecting the
audio output signals from the AUDIO OUT terminals
(L ch and R ch). This display setting should normally
be left in the stereo position, so that when a stereo
tape is played, the stereo sound will be heard
through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the
same mono sound will be heard from both left and
right channels.
13