Mp3 Playback - JVC 2A73501A User Manual

Dvd player hi-fi video cassette recorder
Table of Contents

Advertisement

This player can play back the MP3-data
which has been recorded on CD-R or CD-
RW. To produce the MP3-data, you need a
Windows-PC with CD-ROM drive and a MP3-
encoding Software (not supplied).
The Apple-HFS-System can not be played.
MP3 CD Information
Limitations on MP3 CD playback
• MP3 CD is the disc that is standardized by
ISO9660, its file name must include 3-digits
extension letters, "mp3".
• The directory and file names of the MP3
CD must correspond to the ISO
standardized files.
• This unit can read 200 files per disc. If
one directory has more than 200 files, it
reads up to 200 files, the remaining files will
be omitted.
• As for multi-session disc, only the first
session can be played.
• If the CD has both audio tracks and MP3
files, only audio tracks are played.
• It may take more than one minute for this
unit to read MP3 files depending on its
structure.
• Music recorded by "Joliet Recording
Specification" can be played back, the file
name is displayed (within 8 letters) on the
screen. Long file names will be condensed.
• The music files recorded by "Hierarchical
File System" (HFS) cannot be played.
Limitations on display
The maximum number for display is 8
letters. Available letters for display are the
following: capital or small alphabets of A
through Z, numbers of 0 through 9, and _
(under score).
Notes on MP3 files
To play back MP3 CD in the recorded order,
1. Use MP3 software that records data
alphabetically or numerically.
2. Name each file including a two-digit or three-
digit number (e.g. "01" "02" or "001" "002").
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3 CDs can not be played back
depending on the recording conditions.
• The CD-R/RW that has no music data or
non-MP3 files can not be played back.
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator
will light)
1
Press OPEN/CLOSE.
The disc tray will open.
Place a disc onto the tray.
2
Press
or OPEN/CLOSE. The
disc tray closes automatically. On
the TV-screen, "
reading file number will appear.
Then playback will commence.
• Reading will take as much time
as the number of file.
• Press 3 to end playback.
3
Press OSD.
Then press
/
MP3
and press OK (Enter).
4
Press
/
or
/
OK (Enter). Track is selected and play commences.
• In case the folder includes more than 9 tracks, press
to display next track list.
• To remove track list, press CANCEL.
• Press
to select "T" and press number keys to
/
input your desired track.
5
Press 3 to end playback.
• The unit records the stopped track.
Press
to resume playback (from the beginning of
track).
• If you press 3 again or unload the disc, the unit will clear
the stopped track.
6
Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
During MP3-Playback, you can not use SEARCH, A-B
Repeat functions.
You can use Repeat(Track or All) and Random functions for
MP3 CD Playback.(See page 45 and 46)

MP3 Playback

T
11
" and then
to select
T
1
000:23
to select the desired track, then press
T
1
000:23
1. \ CRYINI ~ 1
2. \ DANGER ~ 1
3. \ GITARREN
4. \ LILYWA ~ 1
5. \ MERCYS ~ 1
6. \ OBSESS ~ 1
7. \ PINKPA ~ 1
8. \ RUNNIN ~ 1
.
MP3
EAM
PCM
: Select
: Enter
/
MP3
EAM
PCM
: Select
: Search
47

Advertisement

Table of Contents
loading

Table of Contents