Playback Connection - JVC 2A73501A User Manual

The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of SCART socket.
Connection to a Satellite Receiver
If a Satellite Receiver is used, we recommend the following configuration:
Satellite
Antenna
Satellite
Receiver
To record from Satellite Receiver press "AUX" on the remote control of DVD/VCR twice. "A2" will appear
on the front display. Select the desired TV-program at Satellite Receiver.
Connect to a TV with S-Video Output
Audio (L) Output
Audio (R) Output
Note:
• The S-VIDEO jack is useful only for DVD section.
• If you use the connection with S-Video Cord, set the "Video Out Select" (P.44) to "Video".
Connection to a Decoder (for Premiere Programs)
DVD/VCR
Note: Make sure that AV - mode in SYSTEM SETUP - menu has been set
to DEC .
SCART-cable (not supplied)
S-Video Cord (not supplied)
DVD/VCR
S-Video Output
AUDIO Cord (not supplied)
SCART-cable (not supplied)

Playback connection

DVD/VCR
SCART-cable (not supplied)
To S-Video Input
SCART-cable (not supplied)
TV-unit
Cable TV-
connection
RF-Output
TV
TV
To Audio (R) Input
To Audio (L) Input
Decoder
SYSTEM SETUP
CLOCK SET
LANGUAGE/SPRACHE/LANGUE
AV2 [DEC]
SELECT :
ENTER : OK
EXIT : MENU
11