Load A Recordable Disc And Prepare The Playback Source; Select The Recording Source (Input); Start Recording - JVC XL-R910SL Instructions Manual

This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote
control if they have the similar names (or marks) as those on the front panel.
POWER
_ ON/ — OFF
POWER = _ ON
1
Load a Recordable Disc and Prepare
the Playback Source
1 Press POWER to set it to the _ ON position.
2 Press 0 to open the disc tray, and load a disc.
3 Press 0 again to close the disc tray.
The disc tray automatically closes ("CLOSE" flashes on the
display), and the unit starts reading the disc information
recorded on the disc ("TOC READ" flashes), then the display
shows the following.
Ex.: When a CD-R is loaded with the recording
source (input) set to "OPTICAL"
4 Enter the playback component into play pause.
• Refer also to its Instruction manual — normally, press the Play
(3) button, then soon press the Pause (8) button.
2

Select the Recording Source (Input)

Press REC SOURCE.
• Each time you press the button, the recording source (input)
alternates between "ANALOG" and "OPTICAL."
REC
SOURCE
ANALOG
ANALOG* : Select this to record through the Analog Input
jacks.
OPTICAL
: Select this to record through the Digital Optical
terminal.
COMPACT DISC RECORDER
PROGRAM SET CLEAR
AUTO
REPEAT TRACK
POWER
_ ON/ — OFF
RANDOM DISPLAY
AUTO TRACK
Notes:
• If you want to use automatic tracking, see "Using Automatic
*
1 Press REC PAUSE to enter the unit into recording
2 Press REC to start recording.
3 Start playback on the playback component.
To stop recording, press 7.
"BUSY" appears when writing the signals on the disc.
• When no sound comes in for 8 seconds while recording through
OPTICAL
• If you are to play the disc on another CD player compatible with
To eject the disc, press 0.
To turn off the unit, press POWER to set it in the — OFF position
so that the display goes off.
3 1 3
XL-R910
REC
FINALIZE
PAUSE REC
REC DIGITAL
SOURCE ERASE SYNCHRO
2
REC LEVEL
Tracking while Recording" on page 11.
When you select "ANALOG," you have to adjust the recording level
using the REC LEVEL control (see page "Adjusting the Recording
Level through the Analog Input Jacks" on page 11).
3

Start Recording

pause
The recording pause (8) indicator starts
REC
PAUSE
flashing on the display.
REC
the Analog Input, recording automatically stops.
CD-R/CD-RW, you need to finalize the disc, see "Finalizing a
Disc — CD-R/CD-RW" on page 14.
7
REC LEVEL
MIN MAX
12