Domesheet Exchange Instructions - Nokia 9101 Service Manual

CMO Operations & Logistics
Multimedia Creation & Support
Bochum / Germany
5.) Remove the Camera Module with tweezers. Note
the guiding when re-assembling.

12. DOMESHEET EXCHANGE INSTRUCTIONS

9.) Use SRT-6 to lift a bit the Domesheet from Engine
Module.
11.) Place the Domesheet onto the SS-55. Use tweezers
for support when removing the carrier foil.
13.) First press on the Engine Module carefully.
Then lift the Engine Module from the Jig and check if
the Domesheet is correctly stuck.
Service Manual 6101/6102/6103/6102i Level 1&2
PAGE 18 (28)
CONFIDENTIAL
10.) Remove the Domesheet carefully. Do not damage
the LEDs. Check the surface of the Engine Module for
remaining adhesive and clean it if necessary.
12.) Note the guide pins and the corresponding
openings before placing the Engine Module on the
Domesheet Assembly Jig SS-55.
Copyright © 2005-2006 Nokia Corporation. All rights reserved.
Approved 3.0
MGR
11.01.2006