Standby - Miele T 8812 C Operating Instructions Manual

Programmable functions

Standby

To save energy, the programme
sequence/check lights go out and
the indicator light for the Start button
starts flashing slowly.
To come out of standby mode
^ Turn the programme selector or
press the Start button. Neither will
have any effect if a programme is
running.
On
The standby function is activated and
the programme sequence/check lights
will go out after 10 minutes:
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
They will, however, come on for 10
minutes at the end of the programme or
the end of the anti-crease phase. The
buzzer (if selected ) will sound for 10
minutes at the end of the programme.
50
Factory default. Not in current pro-
gramme
As described under "On" above.
However, they will stay on after the pro-
gramme has started and remain visible
during the programme.
Off
The programme sequence/check lights
will stay on while the dryer is switched
on.
Follow the steps (A,B,C ...) to pro-
gramme and store in memory.
^ See next page.