FujiFilm Drypix 7000 Operation Manual page 66

Utility Operation
4 When a screen like that shown below appears, press the
[Fig. 4.37] Details Screen
5
When the
If the operation panel is not touched or no data comes from the outside exceeding a
time period predetermined on this screen, the system proceeds automatically to the
Economy Mode. The Economy Mode will be performed only when the Transition Time is
set up accordingly on this screen.
The Stand-By/Sleep mode pattern will be activated if settings necessary for
"Scheduler" or "Time of Office Closed" are performed accordingly.
Set up the Transition Time and then perform necessary settings for "Scheduler" or
"Time of Office Closed".
[Fig. 4.38] Transition Time Screen
(1) To adjust the time, use the
to change.
(2) Press the
(3) If you press the
(4) If you wish to perform settings for "Scheduler" continuously, proceed to
"4.8.2 Scheduler". To perform settings for "Time of Office Closed", proceed
to "4.8.3 Calendar". If you do not wish to perform settings for either of them, press
the
4-22
button is selected, the display changes to the [Fig. 4.38] screen.
button to determine the setup value.
button, the display returns to the [Fig. 4.37] Details Screen.
button on [Fig. 4.37]. You can then return to the [Fig. 4.36] screen.
or button of the mode pattern you wish
button.
006-235-30 2004.03