Getting Started; Accessories; Placing The Burner; Inserting A Disc - JVC CU-VD40U Instructions Manual

Getting Started

Accessories

Power cord
Remote control
(RM-V41U)
CAUTION:
Do not use the provided AC adapter and power cord with other devices. In addition, do not use AC adapter, power cord and
USB cable other than those provided with this burner. Doing so may result in electric shock or fire.

Placing the Burner

Horizontal orientation
Take note of the top and bottom of the burner and
place it in the horizontal orientation.
Vertical orientation
When using in the vertical orientation, align the vent of
the burner with that of the provided stand, then place
and fix the burner securely on the stand.

Inserting a Disc

When handling a disc, be sure not to touch the playback/recording side of the disc.
Use only the [M] button on the burner or the remote control to eject the disc tray. If you open the tray manually,
there is a risk of the disc dropping out or getting caught.
Horizontal orientation

Preparing the Remote Control

A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.
To Reinsert the Battery
Pull out the battery holder by pressing the lock tab.
USB cable Audio/Video
cable
CD-ROM Recording disc (DVD-R DL)
(For use with high definition Everio Camera.
Cannot be used with an Everio Camera.)
AC adapter
(AP-V400U)
Bottom surface
Stand (provided)
Vertical orientation
Lithium Battery
(CR2025)
Lock Tab
Stand
Lithium Battery (CR2025)
Pre-installed in the remote
control unit.
Vent
EN
FR
ES
7