Error Messages - JVC CU-VD40U Instructions Manual

No images on the TV.
Images are distorted during forward search or
reverse search.
Commercial DVDs cannot be played when the
burner is connected to PC.
Images added by PC cannot be played.
It takes some time to display the images during
still image playback.
When changing from special playback to normal
playback, or during slow playback, mosaic
pattern (block noise) appears.

Error Messages

UNREADABLE DISC
DISC ERROR
CANNOT OPERATE NOW
HDCP INCOMPATIBLE, CANNOT DISPLAY
USE HDCP COMPATIBLE MONITOR
DETECTED COPY GUARD
CANNOT DISPLAY WITH 1080i/720p
SET TO 480i OR 480p
INCOMPATIBLE DATA
CANNOT PLAY BACK
24
Trouble
Trouble
Cause/Action
Is the video input displayed? Change to external output for the burner
connected to a TV with video/audio input connectors.
When the image is not displayed on the TV after pressing the
[RESOLUTION] button, do not operate the burner for 15 seconds.
The resolution setting before the change is restored. (0P19)
Check the resolution setting again. (0P19)
Images may be distorted for sections where the playback speed
changes. This is not a malfunction.
Play the disc of which the region number of the DVD video is "ALL"
or "2".
Images added to the disc (multi-border disc) by PC cannot be played
on this burner.
The file size is too large or there are too many files. This is not a
malfunction.
This is not a malfunction.
Cause/Action
A blank disc is inserted.
Insert a disc that can be played on the burner. (0P25)
The disc may be dirty. Clean the disc and try again.
The disc was not finalized after saving from a high definition Everio
camera. Make sure to finalize the disc after saving. (For details, refer
to the instruction manual of the Everio camera.)
Stop the playback and operate again.
Connect the burner to a HDCP compliant monitor.
Make analog connection and set resolution to "480i" or "480p".
(0P19)
The data format is not compatible. Confirm the data format. (0P25)
The disc was not finalized after saving from a high definition Everio
camera. Make sure to finalize the disc after saving. (For details, refer
to the instruction manual of the Everio camera.)
File data may be missing.