Network Setup - D-Link DCS-6115 User Manual

Section 3: Configuration
Use this section to configure the network connections for your
camera. All relevant information must be entered accurately.
LAN Settings:
This section lets you configure settings for your
local area network (LAN).
DHCP:
Select this connection if you have a DHCP server
running on your network and would like your
camera to obtain an IP address automatically.
Static IP Client:
You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera.
IP Address:
Enter the fixed IP address in this field.
Subnet Mask:
This number is used to determine if the destination
is in the same subnet. The default value is
255.255.255.0.
Default Router:
The gateway (router) used to forward frames to
destinations in a different subnet. Invalid gateway
settings may cause the failure of transmissions.
Primary DNS:
The primary domain name server (DNS) that
translates names into IP addresses.
Secondary
The secondary DNS that acts as a backup to the
DNS:
primary server.
Enable UPnP
Enabling this setting allows your IP camera to be
Presentation:
configured as a UPnP device on your network.
Enable
Enabling this setting allows the camera to add port
UPnP Port
forwarding entries into the router automatically on
Forwarding:
a UPnP capable network.
D-Link DCS-6115 User Manual

Network Setup

DCS-6115
29