Panasonic DP-C406 Function Manual page 9

4
Select "Domain", and confirm the
domain name, and then select "OK".
Ex: pana01
5
Select "OK" to start the authentication
process.
6
This completes the authentication.
After completing the authentication, you can
use the selected function (copying, faxing,
scanning, or printing).
Press the Reset key twice to log out from
the authentication.
If the authentication fails, one of the following
messages will appear.
1 2
Message
Authentication The login failed.
Failed
Check your user name and
password.
Check whether the date and time
are set properly.
Logon Attempts The system has been locked
Exceeded because the permitted number of
log-on attempts has been
exceeded. Please contact the
system administrator.
Connection Unable to connect to the
Failed authentication server. Please
contact the system administrator.
Protocol Error Unable to connect to the
authentication server. Please
contact the system administrator.
Server not Unable to locate the authentication
Found server.
Check whether the DNS domain
name is set properly (See page 15).
Check whether the Internet
Parameters are set properly.
• TCP/IP Address
• TCP/IP Subnet Mask
• TCP/IP Default Gateway
• DNS Server Addresses
Authentication is cancelled if no operation is
performed on the machine within a certain period
of time after authentication is completed. In this
case, you need to perform User Authentication
again before using the machine. The system
administrator can specify the ID Timeout Period.
For details, refer to ID Timeout Setting (see page
17) and Auto Reset Time Setting (see page 19).
The system administrator can specify whether
authentication is required independently for each
function (copying, faxing, scanning, and printing).
For details, refer to Authentication Setting (see
page 12).
Explanation
9