Connecting A Tv; Connecting To Tv - JVC XV-THC60 Instructions Manual

Dvd digital theater system
Hide thumbs Also See for XV-THC60:
Table of Contents

Advertisement

Connections
[
Donot connectthe powercord untilallother connections havebeenmade.
]
Tu obtain
the best possible
sound from this system,
:ou need to
place all the speakers except the subwoofer
at the same distance
from the listening
position.
Center speaker
/
Y
Powered
subwoofer
Surround left "'.
.-"
Surround right
speaker
"
speaker
If your speakers cannot be placed at the same distance from the
listening position
Yuu can adjust the delay time of the speakers. See "Delay menu
(DELAY)" on page 35.
NOTE
• Place the satellite speakers o1"_ a fiat and level surfhce.
• The front and center speakers are magnetically shielded to avoid color
distortions on TVs. However, if not installed properly, they may cause
color distortions. So, pay attention to the *bllowing when installing
the speakers.
When placing the speakers near a TV set, turn offthe TV's main
power switch or unplug it befZ_re installing the speakers. Then wait
at least 30 minutes bef_re turning on the TV's main power switch
again.
Some TVs may still be affected even though you have tbllowed the
above. If this happens, move the speakers away from the TV.
• The surround speakers are not magnetically shielded.
If they are located nearby the TV or monitor, it will probably cause
color distortion on the screen. To avoid this, do not place the speakers
nearby the TV or monitor.
• Be sure to place the powered subwoofer to the TV's right. Ifyou place
the powered subwoof}r to the TV's left, keep suftlcient distance
between them to prevent the TV screen from appearing mottled.
• Distortion
of picture
may occur when connecting
to the TV via a
VCR, or to a TV with a built-in
VCR.
• You need to set "MONITOR
TYPE" in the PICTURE
menu
correctly
according
to the aspect ratio of your TV (See page 34.)
Toconnect a IV equipped with the HDMIjack
HDMI connection
allows you to enjoy high quality picture
on your
HDMI equipped
TV with high-definition
digital video
signals.
• You can select the type of video signal from 480p, 1080i, or 720p.
(See page 18.)
Center unit
]
To HDMI input
HDMI cable (not supplied)
NOTE
• This system outputs
the signal to HDMI MONITOR
OUT terminal
only when the source is DVD.
• This system outputs
the audio signal of 48 kHz, 44.1 kHz, or 32 kHz
Linear PCM from HDMI MONITOR
OUT terminal. To activate or
deactivate
the audio signal output from HDMI terminal,
see page 34.
• HDMI indicator lights on the display window
when the system and
the TV recognize each other and are ready to send and receive signals.
• When you enjoy HDCP contents,
sound and picture may not be
transmitted
to the speakers and TV tbr a fi.'wseconds in the beginning
lbr confirmation.
What is HDMI?
The HDMI (High Definition
Multimedia
Interface)
is the
standard
interl:ace for the next-generation
TV. By connecting
this
system and a TV with the HDMI
cable, digital video signals
and
audio signals are transmitted
through
the cable. You can enjoy
digital video and sound without
AD/DA
conversion
with easy
connection.
In addition,
this system
is compatible
with HDCP
(High-
Bandwidth
Digital
Content
Protection),
and HDCP contents
can
be viewed if you connect
a HDCP
compatible
TV to this system.
Toconnect a IV equipped with the component videoinput
jacks
• With analog video
connection,
you can get better picture
quality
in the order -- Component
video > S-video > Composite
video.
• If }_ur TV supports
progressive
video
input, you can enjoy a high
quality
picture
by setting the progressive
scan mode to active.
(See page 18.)
To component
_
_
videoinput
Center unit
Component
video cord (not supplied)
NOTE
• If the component
video input jacks of your TV are of the BNC type,
use a plug adapter
(not supplied)
to convert the pin plugs to BNC
plugs.
• The component
video signals can be output only when you select
DVD or USB MEMORY
as the source to play. (See page 17.)
Toconnect a TVequipped with thecomposite orS-videojacks
Center unit
_
Composite
video cord (supplied)
or
1
[_
S-video cord
1
(not supplied)
Align the •
marks.
To S-video input
TV
To composite
video input
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents