Getting Started; Connections; Before Making Any Connections; To Connect To A Tv - JVC XV-S320SL Instructions Manual

Getting started

Connections

*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
The unit
DIGITAL OUT VIDEO OUT
PCM / STREAM COMPONENT
Y P P
B R
COAXIAL
OPTICAL
RIGHT LEFT
S-VIDEO VIDEO
AUDIO OUT
Yellow
White
Red
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-video output or the component video output at a time.
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the
rear panel to "S-VIDEO AND VIDEO". ( For XV-S400BK, the VIDEO jack is enabled regardless of this switch position.)
Then, "S-VIDEO" appears on the display window for a few seconds.
(Display Window)
Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed
setting is not effective.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.
16
VIDEO OUT SELECT
S-VIDEO COMPONENT
AND AND
VIDEO VIDEO
: For XV-S400BK
Audio/Video cable
(supplied)
S-video cable
(not supplied)
VCDVD
GROUP TITLE TRACK CHAP
PROGRAM
RANDOM
For XV-S400BK
If the TV has an AV COMPU LINK terminal,
AV COMPU LINK
you can use the AV COMPU LINK function.
See "AV COMPU LINK remote control
system" on page 52 for details.
TV
Yellow
White
Red
A - B
1
IN
S-VIDEO
VIDEO
LEFT
AUDIO
RIGHT