Operating Video Equipment - Sony TRINITRON KV-32V68 Service Manual

Using Your New TV (continued)
MESSAGES allows you to view system messages.
MESSAGES
While in the Program Guide:
To view messages
1 Press MENU.
Press b to get to MESSAGES and press
2
none are available the GUIDE Plus+ ID number will be displayed. If messages remain unread for a
prolonged period, they will be automatically deleted.
EDITOR allows you to adjust channel availability within the grid while using the GUIDE Plus+ feature.
EDITOR
While in the Program Guide:
To turn channels
1 Press MENU.
ON/OFF in the
Press b to get to EDITOR and press
2
3 To CANCEL any further changes, press the blue action button
4 To turn a channel ON/OFF, scroll to it and press the green action button
To reassign a channel number, highlight the channel within the EDITOR screen, and enter the new channel
number on the remote control's keypad.
The order of channels within the Program Grid cannot be changed
The GUIDE Plus+ EDITOR functions independently of your TV's CHANNEL SKIP/ADD feature.
(see page 31 for information on CHANNEL SKIP/ADD)
SETUP
SETUP allows you to start/change the GUIDE Plus+ feature settings and to view a demonstration of its
features.
To use or program
While in the Program Guide:
the GUIDE Plus+
1 Press MENU.
Press b to get to SETUP and press
2 . The setup screen will appear.
3 To change your settings, select SETUP.
4 To view the demonstration, select DEMO.
22
Using Your New TV (continued)
Using the White Labeled Buttons for TV Operations
ENTER
Use to activate a channel selected with the 0-9 buttons.
Use to activate on-screen options while using the GUIDE Plus+ feature.
Pressing the MTS button will cycle through the MTS options (STEREO, SAP,
MTS
MONO). (see the MTS section in "Using the AUDIO
Press repeatedly to cycle through the available displays:
Status
Channel number, current time, channel caption (if set) are displayed.
DISPLAY
CAPTION VISION
Closed captioning will be displayed if the broadcaster offers this service.
(see right)
To cancel the display, press DISPLAY until DISPLAY OFF appears.
Press repeatedly to cycle through available video inputs:
TV, VIDEO 1, VIDEO 2 and VIDEO 3
TV/VIDEO
When you are in a video mode (VIDEO 1, 2, or 3), you will not be able to access the
GUIDE Plus+ feature.
Press to change the VHF/UHF input to the AUX input.
ANT Press to change from VIDEO input to TV input.
For detailed connection information, see "Cable and antenna" or "Cable box and
(AUX input)
cable" on pages 5-6.
The GUIDE Plus+ feature cannot be accessed in AUX mode.
TV/VTR
Press when you are finished using a VCR and you want to switch to the TV input
+
when your remote control is in VCR mode. Your VCR power will remain on.
SYSTEM
The SYSTEM OFF button allows you to power off all Sony equipment at once.
OFF
24
. Messages related to the system will be displayed, if
. All channels available are listed.
JUMP
.
ENTER
.
CAPTION VISION
(Closed Caption)
menu" on page 29)
CAPTION VISION can be used for programs
that are broadcast with closed captioning.
CC1, 2, 3 or 4
Shows you a printed version of the dialog or
sound effects of a program. (The mode should
be set to CC1 for most programs)
TEXT1, 2, 3 or 4
Shows you network/station information
presented using either half or the whole screen.
XDS (Extended Data Service)
Shows a network name, program name,
program length, and time of the show if the
broadcaster offers this service.
Note
• Poor reception of TV programs can cause
errors in CAPTION VISION and XDS.
Captions may appear with a white box or
other errors instead of intended text.
Watching the TV
The following chart will explain the function
of the buttons found on your remote control.
Using the White Labeled Buttons for TV Operations
Press when you want to turn connected equipment on and off.
POWER
VTR/ DBS/
DVD CABLE
You can program your remote control to operate other video equipment. (see
TV
"Operating Video Equipment" on page 34)
FUNCTION Press when you want to control connected equipment with your remote
VTR/ DBS/
DVD CABLE TV
control. (see pages 34-36 for instructions on programming your remote control)
Use for direct channel selection. Press 0-9 to select a channel, the channel will
0 - 9
change after 2 seconds, or you can press ENTER for immediate selection.
and ENTER
CH
Press to scan through the channels.
Keeping the CH + or – pressed allows you to rapidly scan to the desired channel.
PAGE
Press to alternate or jump back and forth between two channels. You can jump
JUMP between the last two channels selected with the 0-9 keys.
This button can also be used to activate on-screen options while using the
GUIDE Plus+ feature.
MUTING
Press to mute the sound (MUTING will appear on the screen). Press again or
press VOL + to restore sound.
Press repeatedly until the TV displays the approximate time in minutes (30, 60, or
SLEEP
90) that you want the TV to remain on before turning off automatically. Cancel by
pressing until SLEEP OFF appears.
Watching two programs at
SET UP
CHANNEL SET UP
GUIDE PLUS+ SET UP one time - PIP
AUTO GUIDE PLUS+: OFF
CHANNEL BLOCK
FAVORITE CHANNEL
These models are equipped with dual tuners.
VIDEO LABEL
CAPTION VISION: CC 1
This means that PIP is "ready to use".
LANGUAGE: ENGLISH
TILT CORRECTION: 0
B
MENU
Select
Move Exit MENU REFER TO THE ILLUSTRATION
OF THE REMOTE CONTROL ON
THE INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
The sound of the main
Main picture
picture is received
received through
the TV
Main
Window picture
picture
received through
the second tuner
Window
picture
Notes
• You must press TV (FUNCTION) before you can
control PIP with the yellow labeled buttons.
• The AUX input cannot be viewed in the window
picture.
• If you have connected a cable box and activated
the GUIDE Plus+ feature, the same picture will
appear in both the main picture and window
picture.
REFER TO THE ILLUSTRATION
OF THE REMOTE CONTROL ON
THE INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Use the Yellow Labeled Buttons for PIP Operations
Press once to display the window picture (1/9 size).
Press again to reduce the size of the window picture (1/16 size).
Press a third time to remove the window picture.
TV/VIDEO Press repeatedly to cycle through available video inputs:
TV, VIDEO 1, VIDEO 2, VIDEO 3
AUDIO Press to alternate sound between the main picture and the window picture.
A will appear for a few seconds to indicate which picture is receiving sound.
TV/VTR
Press to change the TV channel in the window picture.
+
CH
–
Press to move the location of the window picture (counterclockwise) around the
POSITION
main picture.
Press to freeze the window picture. Great for copying down phone numbers,
FREEZE
addresses, recipes, etc.
Press FREEZE again to restore the picture.
SWAP Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be swapped .
23
25