Operating Video Equipment - Sony Trinitron KV-27XBR45 Operating Instructions Manual

Notes
• If more than one code number is listed, try entering them one
by one, until you come to the correct code for your equipment.
• In some rare cases, you may not be able to operate your non.-
Son}, video equipment with this remote control. This is because
your equipment may use a code that is not provided with this
remote control. In this case, please use the equipment's own
remote control unit.
• The code numbers for Sony equipment are assigned at the
factory as follows:
Beta, ED Beta VCR 01
8 mm VCR 02
VHS VCR 03
Caution
When you remove the battery from the remote control, the code
may revert to the factory setting. Reset the code each time you
replace the battery, if necessary.
Operating video equipment
_0 _0 c_C;,_._.__
IL_..____o _mll
Middle position--! |
Video operating
buttons
1
Set the VTR 1-2-3 selector according to the
video equipment you want to operate.
(Rear of the
remote
control)
2
equipment.
Operating a VCR
To turn on or off
To change channels
To record
Use the video operating buttons on the
remote control to operate the video
To play
To stop
To fast forward
To rewind the tape
To pause
To search the picture
forward and backward
Buttons on the remote
control
Press POWER
Press CH +/-
Press II ard REC
simultaneously
Press I,.
Press []
Press IH_
Press -,_
Press I I
To resume normal playback,
press a g_ain
Press _q_ ar _ during
playback
To resume normal playback,
release the button.
Operating a multi-disc Buttons on the remote
player control
To play Press i,.
To stop Press []
To pause Press II
To resume normal playback,
press again.
To search the picture Keep pres:dng _ or
forward and backward during playback
To resume normal playback,
release the button.
To search the chapter Press CH _/-
Note
• If the video equipment does not haw," a (ertain function, the
corresponding button on this remote control will not ope:cate.
Operations
I 37