2
Turn the flash on, and then turn the
camera on.
●
A red [ ] icon is now displayed.
●
The flash pilot lamp will light up when the
flash is ready.
3
Choose shooting mode [ ], [
],
[
], or [
].
●
Flash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
4
Set the white balance to [ ]
(= 76).
5
Configure the external flash.
●
Press the [
] button, choose [Flash
Control] on the [
] tab, and then press
the [ ] button.
●
Options already set on the flash itself are
displayed.
●
Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons to
adjust the setting.
●
Available items vary depending on the
shooting mode and the flash attached
( = 163).
●
Settings for the built-in flash cannot be configured while a
Speedlite EX series flash is attached, because that setting screen
is no longer accessible.
●
You can also access the setting screen by pressing the [ ] button
for at least one second.
●
] shooting mode can be configured just as
Flash settings in [
they are in [ ] mode.
●
600EX-RT/580EX II only: [Flash Control] is not available if the
external flash has been set up for stroboscopic flash.
●
320EX only: Auto LED lighting is only available in low-light movie
recording or in Movie mode. In this case, the [
Using Speedlite Bracket SB-E2 (Sold Separately)
●
Using the optional Speedlite Bracket SB-
E2 can help prevent unnatural shadows
next to subjects during vertical shooting.
●
To keep the LCD screen out of the way
of the bracket, use the screen closed and
facing outward.
Before Use
Basic Guide
Advanced Guide
1
2
3
] icon is shown.
4
5
Still Images
Movies
6
7
8
9
10
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
162