Raymarine p70 User Reference page 46

Alarm name Alarm type
SeaTalk fail Safety Alarm
EEPROM Safety Alarm
corruption
No Pilot Safety Alarm
No Compass Safety Alarm
46
Description Action
Total SeaTalk • Check
data transmission connections
problem. for short or
open circuit.
• Check system
for device
fault.
• Pilot drops to
standby and
alarm times
out after 10
seconds.
A corruption • Pilot drops to
of critical standby and
configuration alarm times
data has out after 10
occurred. seconds.
The Pilot • Check Seatalk
controller has lost or Seatalk
communications bus wiring
with the course between SPX
computer; and Pilot
this alarm is controller.
generated by the
• Check that
Pilot controller.
the course
computer is
powered up.
Compass is not • Check
connected. connections
and compass
transducer.
Alarm name Alarm type
Rate Gyro fault Safety Alarm
Current Limit Safety Alarm
Rudder Safety Alarm
ng
reference unit
failure
Description Action
The gyro sensor • Internal
has failed. Gyro failure,
investigate
fault and
Consult a
Raymarine
Service Agent.
Drive overload • Check drive
current unit and
exceeded.
connections
for stall or
short circuit
wiring
• Pilot drops to
standby and
alarm times
out after 10
seconds.
Rudder • Pilot drops to
Reference standby and
connection has alarm times
been lost, or out after 10
exceeded it's seconds.
limits.
Rudder reference
transducer has
failed while in
auto. Angle
is more than
50 degrees or
connection to
rudder reference
is lost
p70 / p70r Pilot controller User reference