To Use The Remote Control Unit For Tv Operation - JVC XV-D721BK Instructions Manual

To use the remote control unit for TV operation

You can operate your TV from the remote control unit.
Setting the remote control signal for operating your TV.
1
Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by
using the numeric buttons (0 to 9).
Do not release TV/VIDEO. Keep holding it until the next step is completed.
Example:
To enter the manufacturer code "01":
Press "0" then "1."
Manufacturer code list
No. Manufacturer
01 JVC
02 PHILIPS/CCE/MAGNAVOX
03 MITSUBISHI
04 PANASONIC
05 RCA
06 SHARP
07 SONY
08 TOSHIBA
09 ZENITH
10 PHILCO/HITACHI
11 PANASONIC
12 SAMSUNG
13 SANYO/SEARS
14 TOSHIBA
15 GRADIENTE
16 SANYO
17 PHILCO/DAEWOO
18 LG (GOLDSTAR)
19 GRUNDIG
20 NEC/GRADIENTE
21 PHILCO
2 Press 7 while holding down TV/VIDEO.
3
Try to operate your TV by pressing TV POWER.
If your TV turns on or off, you have successfully set the control signal.
The following buttons can be used for operating the TV.
To use the CURSOR (CH.–, CH.+, VOL.+, VOL.–), TV/VIDEO and numeric buttons for TV control,
set the TV-DVD switch to "TV".
NOTES
• The remote control unit is initially set for operating a JVC TV.
• If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.
No. Manufacturer
22 BEIJING/NOBLEX
23 JVC (ONWA)
24 JVC (ONWA)
25 JVC (ONWA)
26 THOMSON
27 FERGUSON
28 ITT
29 MIVAR
30 FINLUX
31 NOKIA
32 FUNAI
33 SAMSUNG
34 SAMSUNG/PEONY/CHANGHONG
35 SAMSUNG
36 AIWA
37 DAEWOO
38 JINXING/PEONY
39 PEONY
40 KONKA
41 TCL
Turns the TV on or off.
Used to change the TV channel.
Used to adjust the TV volume.
Used to select the TV channel.
to
Mutes the TV sound.
Switches input mode (either TV or VIDEO). Used to switch the TV input mode
between TV and VIDEO.
Getting started
TV POWER
TV/VIDEO
Numeric
buttons
7
18