Toshiba 19LV505C Owner's Manual page 59

19/22-inch diagonal lcd tv/dvd combination
Table of Contents

Advertisement

Setting details (continued)
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: fi lm content (pictures
recorded from fi lms at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Select this selection normally.
The DVD player automatically detects
source content, fi lm or video of
playback source, and converts that
signal in an appropriate method.
Film:
The DVD player converts fi lm content
pictures appropriately. Suitable for
playback of fi lm content pictures.
Video: The DVD player fi lters video signal and
converts it appropriately.
Suitable for playback of video content
pictures.
Note:
• Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".
JPEG Interval
You can continuously playback all JPEG fi les
automatically.
After the selection below, the disc will start playback on
JPEG fi les which have been recorded.
Off:
Plays back one fi le at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show at
15 second intervals.
50S0301A.indb 59
50S0301A.indb 59
■ Night Mode
Night Mode enables you to control the dynamic range so as
to achieve a suitable sound for your equipment.
Off: It plays back at the recording level on the disc.
On: Loud sound such as explosion is toned down
slightly when played back. This is suitable when
it is connected to a stereo.
Note:
This function works only when the disc recorded with
Dolby Digital is played back.
The level of Night Mode may differ depending on DVD
video disc.
■ Digital Out
You can select the digital output sound format corresponding
to your system connection.
Off:
There is no sound output from DIGITAL AUDIO OUT
jack.
PCM:
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo
amplifier.
Bitstream:
Disc audio bitstream data will be output.
Note:
Even if you select "Bitstream", MPEG Audio will be output
in PCM format.
Night Mode
Menu
E.B.L.
Parental
: Off
: English
: Off
: Off
TV Screen
Digital Out
Subtitle
Set Password
: English
: Bitstream
: 4:3
Audio
Output
Display
: English
: On
: Interlace
Picture Mode
DivX(R) VOD
: Auto
JPEG Interval
: 5 Seconds
Screen Saver
: On
59
2/5/08 5:59:22 PM
2/5/08 5:59:22 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

22lv505c

Table of Contents