Toshiba 19LV505C Owner's Manual page 19

Connecting to an amplifi er equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifi er equipped with a digital audio input and speaker
system (right and left front speakers).
Note: PCM audio is limited to DVD or CD playback.
Amplifi er equipped with a
To COAXIAL
type digital
audio input
Note:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor.
• Refer to the ownerʼs manual of the connected equipment as well.
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiverʼs volume to a moderate listening level.
Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifi er before you connect or disconnect the TV/DVDʼs power cord. If you leave the amplifi erʼs power on, the speakers
may be damaged.
Connecting to an HDMI or a DVI device
About HDMI
HDMI (High Defi nition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specifi cation. HDCP is used to protect digital content transmitted
and received by DVI-compliant or HDMI-compliant displays.
DVI device
HDMI device
Note:
• You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see "Selecting the HDMI audio
input source" on page 37). Otherwise you will only see the image with no sound.
50S0301A.indb 19 50S0301A.indb 19
Digital audio input
75
Ω
To DVI output
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
or
HDMI cable (type A connector)
(not supplied)
To HDMI out
Back side
coaxial cable (not supplied)
HDMI has the capability to support standard, enhanced, or high-
defi nition video plus standard to multi-channel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
Back side
To PC AUDIO IN
(not supplied)
To COAXIAL DIGITAL
AUDIO OUT
To HDMI IN
19
2/5/08 5:58:37 PM 2/5/08 5:58:37 PM