Advertisement
Getting started
Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
*In the following connection examples, the rear panel drawing of the unit is based on XV-521BK/523GD/525BK. The
XV-421BK rear panel looks different.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio
outputs to your separate audio equipment. (See the following pages.)
The unit
DIGITAL OUT
VIDEO OUT
PCM/STREAM
COMPONENT
COAXIAL
Y
P
B
OPTICAL
R
S-VIDEO
VIDEO
AUDIO OUT
Yellow
: except XV-421BK
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts
stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-
video cable in addition to the (standard) video connection to get better picture quality.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.
AV COMPU LINK
P
R
L
White
Red
Audio/video cable
(supplied)
* If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function
(except XV-421BK).
See "AV COMPU LINK remote control
system" on page 41 for details.
S-video cable
(supplied)
TV
IN
S-VIDEO
VIDEO
Yellow
LEFT
White
RIGHT
Red
Getting started
AUDIO
12
Advertisement
