Stereo Recording And Playback; Separate Audio Program (Sap) - JVC Model HR-XVC1UJ User Manual

Stereo Recording and Playback / Separate Audio Program (SAP)
Stereo Recording and
Playback
The VHS Hi-Fi audio system permits high
fidelity recording of MTS STEREO TV
broadcasts.
TV
VCR DVD
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
/INDEX
ENTER/
SET
SELECT
SET UP
MENU
VCR/DVD/TV
NOTES:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.
When a MTS STEREO broadcast is
received, the word STEREO will appear
on the screen and the program can be
viewed or recorded in stereo.
The Hi-Fi STEREO recording procedure
is the same as for normal recordings.
NOTES:
POWER
When using a CATV system, stereo TV programs may be transmitted
over a mono cable channel. In this case the word "STEREO" will not
appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO videotape, press A. MONITOR to select how the
audio will be heard through the speakers. Normally set to the Hi-Fi
OPEN/
CLOSE
STEREO position, this button can be set to the MONO position if the
ZERO RETURN
stereo broadcast or videotape audio is of poor quality. The "R" and "L"
SEARCH
positions allow the audio from the Right or Left Hi-Fi channel to be heard
MODE
over both TV speakers. This button has no effect when viewing a MONO
REPEAT
A-B
videotape or TV program. Each time when you press the button, OUTPUT
TV SELECTION display appears on the screen for several seconds. Refer
to the chart below.
POWER
INPUT
TV VOL

Separate Audio Program (SAP)

SKIP
/INDEX
Your VCR is fitted with a SAP broadcast system which enables
you to switch to a separate audio program when viewing a
selected channel.
SET
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
CANCEL
1
2
Listening to SAP
When the VCR is turned on or a channel selection is made, make
certain the letters "SAP" appears on the screen. This means that the
"Separate Audio Program" broadcasting is available.
OUTPUT
SELECTION
STEREO
L ch
R ch
MONO
Press SETUP MENU. Then press
Then press ENTER to select [ON].
Then press SETUP MENU until
the menu screen is cleared.
STEREO SAP
STEREO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
or to select SAP.
MENU
TIMER REC SET
AUTO REPEAT
SAP
CH SET UP
SYSTEM SET UP
+/-/ENTER/MENU
á
SAP
OR
ON OFF
ON OFF
ñ
33