Setting The Video Channel; Setting The Language - JVC Model HR-XVC1UJ User Manual

Setting the Video Channel / Setting the language

Setting the Video Channel

To view playback of a recorded tape,
or to watch a program selected by
the VCR's channel selector, the TV
must be set to channel 3 or 4 (video
channel).
TV
VCR
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
/INDEX
ENTER/
SET
SELECT
SET UP
MENU
NOTES:
• If the unit does not operate properly,
or No key operation (by the unit and/
or the remote control): Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
• If no buttons are pressed for more than
60 seconds,the MENU screen will
return to normal TV operation
automatically.
• Both the VCR and the DVD have their
own menu options (See page 36).
18
POWER
DVD
OPEN/
CLOSE
ZERO RETURN
SEARCH
MODE
REPEAT
TITLE
A-B
TV
POWER
INPUT
TV VOL
SKIP
/INDEX
SET
CANCEL
When a TV is connected with the 75 ohm coaxial cable only.
1
Press POWER to turn on the DVD/VCR.
2
Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to
select the VCR mode. The VCR indicator on the front panel
will light.
3
Set the 3/4 Channel selector switch on the rear panel to CH
3 or 4.
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 3.
5
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.

Setting the language

You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
1
Press SETUP MENU,
If you use the unit for the first time
and press SETUP MENU, instead
of the main menu screen on the
right the SYSTEM SET UP menu
screen in step 2 may appear.
2
Press or to select the
"LANGUAGE" option, then press
ENTER.
3
Press or to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
4
Press SETUP MENU until the MENU screen is cleared.
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
SAP ON OFF
CH SET UP
SYSTEM SET UP
+/-/ENTER/MENU
á ñ
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU