Dvd/Vcr To Tv Connection - JVC Model HR-XVC1UJ User Manual

DVD/VCR TO TV CONNECTION

After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
75 ohm Coaxial Cable (supplied)
75 ohm Coaxial Cable
(supplied)
75 ohm Coaxial Cable
(supplied)
Splitter
75 ohm Input
75/300 ohm outputs
(not supplied)
Splitter
75 ohm Input
300 ohm outputs
(not supplied)
TV
NOTE: If a VHF or UHF antenna is
VHF/UHF IN
TV with single 75 ohm VHF/UHF
antenna input
TV
NOTE: If a VHF or UHF antenna is
UHF
VHF
TV with 300 ohm UHFand 75 ohm VHF
antenna inputs
TV
NOTE: If a VHF or UHF antenna is
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
Basic connections
used, set the TV/CATV
menu option to the "TV"
mode.
used, set the TV/CATV
menu option to the "TV"
mode.
used, set the TV/CATV
menu option to the "TV"
mode.
13