Changing A Programme To Cancel A Programme; Adding Or Removing Items; To Select A Different Programme During Drying - Miele T 5205 C Operating And Installation Instructions

Changing a programme
To cancel a programme
Turn the programme selector switch
r
to the End position.
For safety reasons all programmes
where the residual moisture content is
monitored have a maximum running
time of 240 minutes, after which period
the heater elements are switched off
and the cooling down phase com-
mences.

Adding or removing items

Press the door
the door.
If the door is opened during drying the
programme will have to be started
again. Take out or add items as re-
quired.
Close the door.
Press the Start
The programme selected will then con-
tinue from the point it was at when the
door was opened.
The programme is not continued
– if there is a power failure lasting
more than 30 minutes
– if the programme has already
ä
reached the
~
phase or the
stage.
a
button to open
h
button.
cooling down
r Anti-crease
Changing a programme
To select a different pro-
gramme during drying
Turn the programme selector to the
required programme.
The new programme starts from the be-
ginning.
15