Miele T 5205 C Operating And Installation Instructions page 21

Fault
Drying times are
too long.
Possible cause
The fluff filters and / or the
heat exchanger might be
clogged up.
Ventilation to and from
the dryer is insufficient
(e.g. in a small room) .
The vent below the
door is blocked.
The laundry was not
sufficiently spun.
The dryer has been over
loaded.
Metallic components
e.g. zips have prevented
the dryer from
registering the correct
moisture level in the
laundry.
If after checking all the above, drying times are still too
long, there may be a fault. Contact the Service Dept.
Problem solving guide
Remedy
– Clean as described in
"Cleaning and Care".
– Open a door or window
while the machine is
operating to increase air
flow.
– Remove any objects that
are causing the blockage.
– Spin the laundry in the
washing machine at the
highest possible speed.
– Observe the maximum
loads for the programme
selected.
– Complete the drying
process using a Timed
Drying progamme
C
.
21