It is advisable to place two magnets or to close off the
openings (C) to retrieve the locking balls and springs
for shafts 1/2 and 3/4.
Remove the reverse gear shaft (A).
Remove the reverse gear switch (B).
Carry out an outwards stress test on the control shaft.
Lift and remove the mechanism housing.
MANUAL GEARBOX
Repairing the gearbox
Rotate the reverse gear shaft assembly to the left and
remove the reverse/5
Gently lift the primary shaft and remove the reverse
gear shaft assembly.
21-9
th
gear fork shaft.
21