Trip Control Button; New Mission; Start Trip Procedure; Trip Exit - Fiat Ducato Owner's Manual

Trip time
DASHBOARD
This value shows the time elapsed since the start of the
AND CONTROLS

new mission.

IMPORTANT If information is not available, the message
"- - -" will appear instead of the Trip Computer values.
SAFETY
Displaying of the values will be resumed when normal op-
eration is restored without resetting the values displayed
before the problem nor starting a new mission.
STARTING
TRIP control button fig. 22
AND DRIVING
The TRIP button is located on the right hand lever. With the
ignition key turned to MAR, this button allows you to view
the previously described parameters and also zero them to
WARNING LIGHTS
begin a new mission:
AND MESSAGES
– short pressing to display the different values;
– prolonged pressing to reset and then start a new mis-
IN AN EMERGENCY
sion.
New mission
The new mission begins after:
MAINTENANCE
– "manual" resetting by the user, by pressing the relevant
AND CARE
button;
– "automatic" resetting, when the "Trip distance" reach-
TECHNICAL es 3999.9 km or 9999.9 km (according to the type of dis-
play) or when the "Travel time" reaches 99.59 (99 hours
SPECIFICATIONS
and 59 minutes);
– disconnection/reconnection of the battery.
INDEX
36
IMPORTANT If the reset operation is carried out when
"Trip A" is being displayed, only the information associ-
ated with this function is reset.
IMPORTANT If the reset operation is carried out when
"Trip B" is being displayed, only the information associat-
ed with this function is reset.

Start trip procedure

With the ignition key in the MAR position, reset by press-
ing the TRIP button and keeping it pressed for more than
2 seconds.

Trip Exit

To quit the Trip function: keep button MODE pressed for
over 2 seconds.
fig. 22
F0N0019m