Replacing An Interior Bulb; Side Marker Lights; Front Ceiling Light - Fiat Ducato Owner's Manual

SIDE MARKER LIGHTS (where provided)
To change the bulb proceed as follows:
❒
for extra-long van:
– undo both fastening screws C-fig. 193 and remove
the light;
– remove the bulb-holder D on the rear of the light,
turning through 1/4 turn;
– remove the snap-fitted bulb and replace.
❒
for chassis cabs with platform:
– remove bulb-holder on the rear of the light, turning
through 1/4 turn;
– remove the snap-fitted bulb and replace.
fig. 192

REPLACING AN INTERIOR BULB

For the type of bulb and power rating, see "When need-
ing to change a bulb".

FRONT CEILING LIGHT

Proceed as follows to replace the bulbs:
❒ work in the points shown by the arrows and remove
the ceiling light A-fig. 194;
❒ open the protection door B-fig. 195;
❒ replace bulbs C-fig. 195 releasing them from the side
contacts; make sure that new bulbs are correctly
clamped between contacts;
❒ close the door B-fig. 195 and secure the ceiling light
A-fig. 194 in its housing locking it properly.
AF0N0089m
fig. 193
DASHBOARD
AND CONTROLS
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
F0N0244m
187