The Front Panel; Figure 3-2: Front Panel - Linksys BEFSX41 User Manual

Broadband firewall router with 4-port switch/vpn endpoint
Hide thumbs Also See for BEFSX41:
Table of Contents

Advertisement

Broadband Firewall Router with 4-Port Switch/VPN Endpoint

The Front Panel

The Router's LEDs, which inform you about network activities, are located on the front panel.
Power
Green. The Power LED lights up when the Router is powered on. If the LED is flashing, the
Router is running a diagnostic test.
DMZ
Green. The DMZ LED indicates when the DMZ function is being used. This LED will remain lit
as long as DMZ is enabled.
Ethernet
Green. The Ethernet LED serves two purposes. If the LED is continuously lit, the Router is
connected to a device through the corresponding port (1, 2, 3, or 4). If the LED is flashing, the
Router is actively sending or receiving data over that port.
Internet
Green. The Internet LED lights up when the Router is connected to your cable or DSL modem.
Proceed to "Chapter 4: Connecting the Router."
Chapter 3: Getting to Know the Router
The Front Panel

Figure 3-2: Front Panel

8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents