The Back Panel; The Front Panel - Linksys WRV54G User Manual

Dual-Band Wireless Access Point
Chapter 3: Getting to Know the Wireless-G Broadband VPN
Router

The Back Panel

The Router's ports, where a network cable is connected, are located on the back panel.
Internet The Internet port connects to your modem.
LAN (1-4) The LAN (Local Area Network) ports connect to your PC and other network devices.
Power The Power port is where you will connect the power adapter.
Reset Button There are two ways to Reset the Router's factory defaults. Either press the Reset Button, for
approximately ten seconds, or restore the defaults from the Password tab in the Access
Point's Web-Based Utility.
With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at
www.linksys.com for more information about products that work with the Access Point.

The Front Panel

The Router's LEDs, where information about network activity is displayed, are located on the front panel.
Chapter 3: Getting to Know the Wireless-G Broadband VPN Router
The Back Panel
Figure 3-1: Back Panel
Important: Resetting the Access Point will
erase all of your settings (WEP Encryption,
Wireless and LAN settings, etc.) and replace
them with the factory defaults. Do not reset
the Access Point if you want to retain these
settings.
8