Chevrolet Captiva OM C140 Manuals page 275

Resuming a set speed
Suppose you set your cruise control
at a desired speed and then you
apply the brake pedal or press the I
button. This, of course, shuts off the
cruise control. But you don't need to
reset it. Once you're going about 40
km/h (25 mph) or more, you can tap
the RES/+ button.
You'll go right back up to your
chosen speed and stay there.
If you hold the RES/+ button longer,
the vehicle will keep going faster until
you release the button, apply the
brake pedal or press the I button.
So unless you want to go faster, do
not hold the RES/+ button.
Increasing speed while using
cruse control
There are two ways to go to a higher
speed:
 Use the accelerator pedal to get
to a higher speed. Press the
SET/- button, then release the
button and the accelerator pedal.
You will now cruise at the higher
speed.
 Press the RES/+ button. Hold it
there until you get up to the
speed you want, and then
release the button. To increase
your speed in very small
amounts, tap the RES/+ button
and then release it. Each time
you do this, your vehicle will go
about 2 km/h (1.2 mph) faster.
The accelerate feature will only
work after you turn on the cruise
control by pressing the SET/-
button.
Driving and operating 273
Reducing speed while using
cruise control
There are two ways to reduce your
speed while using cruise control:
 Press the SET/- button until you
reach the lower speed you want,
then release it.
 To slow down in very small
amounts, tap the SET/- button.
Each time you do this, you will go
about 2 km/h (1.2 mph) slower.
Passing another vehicle while
using cruise contorl
Use the accelerator pedal to
increase your speed. When you take
your foot off the pedal, your vehicle
will slow down to the cruise control
speed you set earlier.