Table of Contents
Advertisement
Operations (Step 5 Setting Using the Web Browser)
5-4 Setting Using the Web Browser (11. Auto Trace Setting)
Auto Trace Setting window:
http:// ****** /autotrace-e.html (" ****** " represents the URL of VN-C655)
For setting the Auto Trace operation.
<Record Start Confirmation Screen>
[Image Setting] Screen
106
1
Press
[Record Start Confirmation Screen].
Memorization of Auto Trace will start
upon clicking
Pan/Tilt as well as Zoom operations will
be stored. (Approximately 30 seconds)
2
For manual Pan/Tilt and Zoom
operation.
3
To end a recording operation, click
.
The following warning message will
be displayed upon clicking the
button if recording has
not started.
Notes
Auto Trace will not be memorized
in the following cases. A warning
message will appear.
• During Auto Pan operation
• During Auto Patrol operation
• During Auto Trace operation
4
For setting image quality.
Upon clicking
will switch to the image quality setting
during Auto Trace operation.
The same settings will also be applied
during the Auto Pan operation. Use the
[Image Setting] screen to adjust image
quality.
Click
to display the [Image
Setting] screen.
to display the
and subsequent
, the current image
Advertisement
Table of Contents
