JVC VN-V25U Instructions Manual page 79

A
On Screen Display
Settings
Camera ID
Display MD
Time
Format
B
Stream Settings
Stream
HTTP Port
Frame Rate
For setting display items on the viewer screen.
For the JPEG Viewer, characters are displayed as overlay on the video
image.
Select AOnB to display [Camera ID].
[Camera ID] can be specified on the [Camera] page of VN-V25U.
(A Page 35)
Selecting AOnB displays the area in which motion is detected in red.
Select AOnB to display the time.
This indicates the time that is stored in the JPEG data.
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
For specifying settings for receiving JPEG stream.
For selecting the protocol when the viewer acquires data from VN-V25U.
When AHTTPB is selected, lost packets are recovered via resending.
VN-V25U may be monitored using multiple viewers when AMulticastB is
selected.
When playing back via multicast., start multicast sending on the
[Streaming] page of the VN-V25U unit.
Caution:
● When the built-in viewer is launched with AMulticastB specified, a
Windows firewall warning may appear. In this case, select AunblockB
and proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V25U. (A Page 57)
For selecting the acquisition frame rate of the viewer.
Selecting a large frame rate will increase the processing load of the
computer on which the viewer is running.
Caution:
● Set to a rate such that the CPU burden of the computer does not
exceed 80 %. When the CPU is overloaded, the computer may not
function properly.
79