JVC VN-V25U Instructions Manual page 61

Destination Address
A
Access
Restrictions
B
IP Address
Caution:
● Note that when AallowB is selected and all IP
address fields are left blank, JPEG/MPEG4
acquisition by all IP addresses will be denied.
Restrictions are not imposed on access to
the Web Settings page.
Additionally, VN-V25U will also deny access
when instructions for transmission to the
specified IP address are sent via API.
Restrictions may be imposed on clients accessing VN-V25U using the IP
address.
When AdenyB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item will be denied. Restrictions are not
imposed on access to the Web Settings page.
When AallowB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item will be permitted. Restrictions are not
imposed on access to the Web Settings page.
When a multicast address is specified and AdenyB is selected, VN-V25U
will deny transmission to this multicast address.
When a multicast address is specified and AallowB is selected, VN-V25U
will only accept transmission to this multicast address and deny
transmission to multicast addresses that are not stated in the [IP Address]
field.
Note:
● To specify a specific IP address range, enter
a combination of the IP address and subnet
mask in the [IP Address] field.
● Define the subnet mask using a length
between 8 ~ 30 bits.
For example, a range between 192.168.0.0
to 192.168.0.255 is denoted as 192.168.0.0/
24 ([IP Address]/[bit length of subnet mask]).
61