Panasonic KX-T2378JXW Operating Instructions Manual page 23

PQQX13204YA-03 01.11.28 8:35 AM y [ W 23
To store in a LOWER memory location
(PROGRAM)
1 Press
2 Enter a phone number, up to 22 digits.
≥If you enter a wrong number, press
(PROGRAM) and start again from step 1.
(AUTO/LOWER)
3 Press
4
Press one of the one-touch auto dial
buttons.
≥A long beep sounds.
≥The unit will return to the standby mode.
≥If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift
the handset and place it on the cradle to return to the standby mode, and
start again from step 1.
≥If a pause is required for dialing, press (PAUSE) where needed. Pressing
(PAUSE) counts as one digit (p. 25).
To erase a stored number
(PROGRAM)
1 Press
2 If the phone number is in an UPPER
memory location, press the one-touch
auto dial button for the phone number
to be erased.
OR
If the phone number is in a LOWER
memory location, press
then press the one-touch auto dial
button for the phone number to be
erased.
≥A long beep sounds.
≥The unit will return to the standby mode.
.
.
.
(AUTO/LOWER)
,
"
23