JVC GR-DV1 Instructions Manual page 24

24
blinking
1 min
0 min blinking
Tape Remaining Indicator
The time remaining on the tape is automatically
monitored and displayed in the viewfinder
( pg. 66). When the tape ends, "TAPE END"
appears in the viewfinder.
Stable Shooting Positions
Before pressing RECORDING START/
STOP, ZOOM or SNAP SHOT, be sure to
hold the camcorder with both hands.
3 0 min 29 min
REC
blinking 3 min
2 min
Feet set slightly
apart with your
body turned
toward the
subject
For low
shooting
RECORDING (Cont.)
STOP PLAY
/PAUSE
RE SHOOT BUTTON
CAN. BUTTON
Re Shoot A Scene
If you aren't pleased with a scene you just recorded
(after having checked it in the viewfinder), you can
easily return to the beginning and record it again.
1 ENGAGE RECORD/STANDBY MODE
Press RECORDING START/STOP, then press
RE SHOOT. The tape returns automatically to
the starting point of the most recent recording,
and the camcorder enters RECORD/STANDBY
mode.
•If, after the tape has rewound to the
beginning of the scene, you decide you don't
need to re-record, press CAN. The tape auto-
matically fast-forwards to the end of the scene.
Fasten hand strap around wrist
Lean against a wall
or pole for support