TrekStor Tv streamer User Manual page 87

Advanced Users Guide
9. Firmware upgrade (continued)
2. After message window appears, the TrekStor TV will be rebooted, and then the Firmware update will
start.
3. You will be able to see the progress of firmware upgrade; it normally takes approximately 5 minutes
to be completed. Do not switch off your TrekStor TV during the firmware update as this may damage
the device!
- Depending on firmware, screen settings may changed to the factory default values.
- If you can't see the screen, please connect to your TV via the composite connection.
Note: Please make sure to use a USB-Stick no bigger than 2GB. Format the stick to FAT32.
After the process is finished, you must perform a [RESTORE DEFAULT] via the [SETTINGS] menu
This will remove all your saved presets, but is necessary for the proper function of the device.