Side Turn Signal Lamps; Center High-Mounted Stoplamp (Chmsl); License Plate Lamp - Chevrolet Captiva Owner's Manual

9-34 Vehicle Care
To replace one of these lamps:
1. Open the tailgate. See Tailgate on
page 1-7.
2. Remove the two screws retaining
the taillamp assembly in place.
3. Pull the lamp assembly straight
rearward releasing the retaining
studs from the grommets.
4. Turn the bulb socket counterclock-
wise to remove it.
5. Turn the bulb counterclockwise to
remove it from the bulb socket.
6. Install the new bulb into the bulb
socket.
7. Turn the bulb socket clockwise to
reinstall.
8. Install the lamp assembly into the
vehicle. Make sure to align the
retaining studs to the grommets.
9. Install two screws to secure lamp
assembly in place on the vehicle.

SIDE TURN SIGNAL LAMPS

If the side turn signal lamp in the
outside rearview mirror is not operated,
have the checked by CHEVROLET
retailer.
CENTER HIGH-MOUNTED
STOPLAMP (CHMSL)
If the CHMSL is not operated, have the
checked by CHEVROLET retailer.

LICENSE PLATE LAMP

The licence plate lamps for this vehicle
are on the trunk lid.
To replace one of these bulbs:
1. Open the tailgate. See Tailgate on
page 1-7.
2. Remove two screws and the lamp
assembly.
3. Turn the bulb socket counterclock-
wise to remove it from the lamp
assembly.
4. Pull the bulb straight out of the bulb
socket.