Editing; Dubbing To A Vcr - JVC GR-DF420 Instructions Manual

EDITING

38
EN

Dubbing To A VCR

To S connector
S cable
(optional)
1 2
"Y/C"/"CVBS"
Video Out Select
Switch
To VCR
VCR
A
To S-VIDEO IN**
B
Yellow to VIDEO IN
C
Red to AUDIO R IN
D
White to AUDIO L IN
* If your VCR has a SCART connector, use the
provided cable adapter.
** Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
NOTES:
Set the video out select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
The S-Video cable is optional. Be sure to use
the YTU94146A S-Video cable. Consult the
JVC Service Center described on the sheet
included in the package for details on its
availability. Make sure to connect the end with
a core filter to the camcorder. The core filter
reduces interference.
Open the cover.
To AV connector
AV cable
(provided)
3 4
Cable
Adapter*
TV
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
( pg. 25, 30)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 25, 30)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 25, 30)
pg. 20)