Additional Features For D.s.c; Protecting Files; Deleting Files - JVC GR-D74U Instructions Manual

ADDITIONAL FEATURES FOR D.S.C.

22
EN

Protecting Files

The Protect mode helps prevent the accidental erasure
of files.
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "PLAY" while pressing down
the Lock Button located on the switch.
A stored file is displayed.
4
Press the MMENU/VOL. Wheel in. The Menu Screen
appears.
5
Make sure "PROTECT" is
selected, and press the MMENU/
VOL. Wheel in. The Sub Menu
appears.
To protect the currently
displayed file
6
Rotate the MMENU/VOL.
Wheel to select "CURRENT", and
press it. The PROTECT screen
appears.
7
Press 3 or 5 to select the
desired file.
8
Rotate the MMENU/VOL.
Wheel to select "EXECUTE", and
press it.
To cancel protection, select
"RETURN".
Repeat steps 7 and 8 for all files
you want to protect.
To protect all files stored in the memory card
6
Rotate the MMENU/VOL. Wheel to select
"PROT.ALL", and press it. The PROTECT screen
appears.
7
Rotate the MMENU/VOL. Wheel to select
"EXECUTE", and press it.
To cancel protection, select "RETURN".
NOTES:
If the " " mark appears, the currently displayed file is
protected.
When the memory card is initialized or corrupted, even
protected files are deleted. If you do not want to lose
important files, transfer them to a PC and save them.
To Remove Protection
Before doing the following, perform steps 1 – 5 in
"Protecting Files".
To remove protection from the currently displayed
file
6
Rotate the MMENU/VOL. Wheel to select
"CURRENT", and press it. The PROTECT screen
appears.
7
Press 3 or 5 to select the desired file.
8
Rotate the MMENU/VOL. Wheel to select
"EXECUTE", and press it.
To cancel selection, select "RETURN".
Repeat steps 7 and 8 for all files you want to remove
protection.
pg. 10)
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
BR I HT G
END
M E NU
PROTECT CUR RENT
PROT . AL L
CANC . AL L
RETURN
P ROTECT
PROTECTED
RETURN
To remove protection from all files stored in the
memory card
6
Rotate the MMENU/VOL. Wheel to select
"CANC.ALL", and press it. The PROTECT screen
appears.
7
Rotate the MMENU/VOL. Wheel to select
"EXECUTE", and press it.
To cancel selection, select "RETURN".

Deleting Files

Previously stored files can be deleted either one at a time
or all at once.
Power Switch
MMENU/VOL.
Lock Button
3
VIDEO/MEMORY
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "PLAY" while pressing down
the Lock Button located on the switch.
A stored file is displayed.
4
Press the MMENU/VOL. Wheel in. The Menu Screen
appears.
5
Rotate the MMENU/VOL. Wheel to select "DELETE",
and press it. The Sub Menu appears.
To delete the currently displayed file
6
Rotate the MMENU/VOL.
Wheel to select "CURRENT", and
press it. The DELETE screen
appears.
7
Press 3 or 5 to select the
desired file.
8
Rotate the MMENU/VOL.
Wheel to select "EXECUTE", and
press it.
To cancel deletion, select
"RETURN".
Repeat steps 7 and 8 for all files
you want to delete.
NOTE:
If the " " mark appears, the selected file is protected and
cannot be deleted.
5
pg. 10)
M E NU
DELETE CUR RENT
ALL
RETURN
D ELETE
DELETE?
EXECUTE
RETURN