Editing; Dubbing To A Vcr - JVC GR-D640E Instructions Manual

EDITING

42
EN

Dubbing To A VCR

To S connector
To AV
connector
Audio/Video
cable
(provided)
1 2
VCR
A
Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors).
B
Red to AUDIO R IN* or OUT**
C
White to AUDIO L IN* or OUT**
D
Black to S-VIDEO IN or OUT** (Connect
when your TV/VCR/VDR has S-VIDEO IN/
OUT**. In this case, it is not necessary to
connect the yellow video cable.)
* Not required for watching still images only.
** GR-D650E only
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Centre described on the sheet included in
the package for details on its availability. Make sure
to connect the end with a core filter to the camera.
The core filter reduces interference.
To use this camcoder as a player
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
S Cable
(optional)
3
4
TV
pg. 23)
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 15)
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "ON" or "OFF".
( pg. 32, 35) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 32, 35)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 32, 35)
To use this camcorder as a recorder
(GR-D650E only)
1
Following the illustrations, connect the
camcorder and the VCR's output connectors.
2
Set "REC MODE" to "SP" or "LP". (
3
Set the camcorder's Power Switch to "PLAY".
4
Set "S/AV INPUT" to "A/V IN" or "S IN"*.
( pg. 32)
* Select "S IN" when using S-VIDEO OUT
connector on your TV/VCR.
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
The " " or "
A/V IN S IN
the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The
rotating.
9
Press 8 to return to the normal playback
mode.
NOTES:
After dubbing, set "S/AV INPUT" back to "OFF".
Analogue signals can be converted to digital
signals with this procedure.
• It is also possible to dub from another
camcorder.
pg. 33)
" indication appears on
indication stops